Welcome to our website!

Need an Answer ? +971 4 422 1879

Machines

PLS

PLS is a high-precision CNC cutting machine with outstanding dynamic properties and modern design, developed especially for high precision plasma cutting. The excellent dynamics is achieved thanks to the low-seated, double-side driven gantry, high-precision linear guidelines and a drive system with helical racks and pre-stressed pinions in all axes. Besides standard accessories (plasma, oxyfuel, marking) the machine can be also equipped with a pipe cutting device.

Technical parameters

Working length	1500 - 50000 mm
Working width	1500 - 4000 mm
Max. number of tool stations	5
Max. thickness of material cut by plasma	according to a plasma source
Max. thickness of material cut by oxyfuel	80 mm (optionally 150 mm)
Positioning speed	up to 44 m/min (depends on version)
Positioning accuracy	± 0,1 mm according to DIN 28 206
Max. diameter of pipes	up to Ø 700 mm

MTilting tool station enables automatic setting of torch slope

for bevel cutting with plasma in longitudinal direction (X-axis).

RSV is dedicated for clamping and turning of pipes and profiles.

Together with plasma rotator and advanced software modules

and libraries from MicroStep it offers the full range of

pipe based applications.

RSV is dedicated for clamping and turning of

pipes and profiles. Together with plasma rotator

and advanced software modules and libraries from

MicroStep it offers the full range of pipe based

1, 7, 16 or 32 – nozzles Inkjet Writer is standard marking

system, which was designed for multi-purpose application in

industrial environment for marking of spongy and non-spongy

surfaces with variable height of letters from 3 to 124 mm.

The system marks various products by logos, bar codes,

information on minimal duration, charge numbers and commission

numbers, readers and weight values, continuous numbering and

production data (date, time, shift) etc. Marking can be lateral,

from above and from below through head.

MicroPunch marking unit is designed for fast

marking of several types of materials –sheets,

tubes, profiles - with differently machined

surfaces.The material can range from plastics

to hardened steel.

CCD camera can be attached to a tool station(e.g. plasma)

or mounted on a separate toolstation. It is used for:

a) scanning of the shape of template for conversion into DXF

b) scanning of holes on plate for positioning

Laser sensor is used to scan plate edges for

automatic alignment of the plate with coordinate

system. Supported is a 3 point or a 5 point

detection whereby the 5 point detection also

verifies the plate size.

Second touchscreen on the gantry has all

functions of a standard touchscreen integrated

in the MMI console. It is very helpful especially

in case of longer machines because the operator

can set all parameters (e.g. for automatic gas

console for oxyfuel) directly on the gantry.