Machines
DS
DS is designed for high-efficiency drilling and cutting with the possibility of automatic plate feeding and automatic part sorting on output. The sheet processing line is dedicated to heavy-duty structural steel applications such as high-precision fittings, gussets and endplates. The machine is designed for a high level of automation within the factory workflow as a time- and cost-effective production solution for certain types of flanged parts.
Technical parameters
MicroStep offers a variety of drilling and tapping tool stationsfor several machine types reaching from small drilling heads for
soft sandwich materials to big drilling and tapping units with
internal cooling of tool and a possibility of automatic tool change.
Multi-tool station carries several torcheson a single Z lifter. Gm-type is dedicated for
cutting of stripes with oxyfuel torches.
ACTG (Automatic calibration of tool geometry)automatically compensates by advanced motion
control any mechanical inaccuracy of the bevel
head which can occur e.g. by accidental collision.
MTilting tool station enables automatic setting of torch slopefor bevel cutting with plasma in longitudinal direction (X-axis).
Multi-tool station carries several torches on a single Z lifter.Gm-type is dedicated for cutting of stripes with oxyfuel torches.
1, 7, 16 or 32 – nozzles Inkjet Writer is standard markingsystem, which was designed for multi-purpose application in
industrial environment for marking of spongy and non-spongy
surfaces with variable height of letters from 3 to 124 mm.
The system marks various products by logos, bar codes,
information on minimal duration, charge numbers and commission
numbers, readers and weight values, continuous numbering and
production data (date, time, shift) etc. Marking can be lateral,
from above and from below through head.
MicroPunch marking unit is designed for fastmarking of several types of materials –sheets,
tubes, profiles - with differently machined
surfaces.The material can range from plastics
to hardened steel.
CCD camera can be attached to a tool station(e.g. plasma)or mounted on a separate toolstation. It is used for:
a) scanning of the shape of template for conversion into DXF
b) scanning of holes on plate for positioning
Laser sensor is used to scan plate edges forautomatic alignment of the plate with coordinate
system. Supported is a 3 point or a 5 point
detection whereby the 5 point detection also
verifies the plate size.